News

Drill Bit Application

time:2023-08-04 17:26:34hit:108

Auger Drill Bits

Used for drilling into dry,hard wood,The spiral auger effectively removes wood chips as you drill.The screw head on the tip draws the bit into the wood elimination the need for pushing.

Auger drill bits.jpg

Cobalt Drill Bits

Used for drilling into high tensile metals.Resistant to ultra high temperatures and severe abrasion. Specifically good for stainless steel,cost iron,welded seams and bronze.

Cobalt Drill bits.jpg

Masonry Drill Bits

Use for drilling into stone,concrete and brick. This bit has a tungsten carbide tip that allows it to drill into these materials.This type of bit should be used at the correct RPM to avoid melting the tip.

Masonry drill bits.jpg

Reduced Shank Drill Bits

Used for drilling into wood,plastics and metals.This bit makes drilling larger hole with a common drill chuck possible.

Reduced Shank Drill bits.jpg

Spade Drill Bits

Used for drilling into wood.This drill bit is for drilling large holes in wood and should be used for wood only.

Spade drill bits.jpg

Twist Drill Bits

Used for drilling into metal,wood and plastics. This is the most common type of drill bit and is meant for multiple uses. This is the most common type of drill bit used in a cordless drill.

Twist drill bits.jpg

Step Drill Bits

Used for drilling into almost any surface(depending on thickness).This bit is for drilling multiple sized holes in most surfaces.It is meant to be used on thin and soft material for enlarge holes and deburring.

Step drill for metal.jpg

Brad Point Drill Bits

Used for drilling into all types of wood. Also called brad point and W point. This bit is designed to not grab or snag. The wider tip allows for entrance before the shaft which makes cleaner holes in wood and some plastics.

Brad point drill bits.jpg


04

Aug
2023